Manual Gear winch "Dina-2" g / p 500(40 m)

Manual rope winches Dina and Dina-2 are designed for lifting, lowering and holding loads during construction, repair and loading and unloading operations. Operating mode-not higher than the 1M mode group according to GOST 25835-83.

Serial production of rope winches with manual drive "Dina " and" Dina-2 " meets the requirements Of the technical regulations of the Customs Union TR CU 010/2011 "on safety of machinery and equipment", which is confirmed by the existing Declaration of compliance. Manufactured according to TU 28.22.12-022-87746082-2018.

Manual rope winches Dina and Dina-2 can be operated both indoors and outdoors.

The manual Dina winch (Dina-2) must be attached to an appropriate device that can withstand the load being lifted and the weight of the winch.

In terms of the impact of climatic factors, rope hand winches Dina AND DINA-2 correspond to the performance of U1 GOST 15150. It is allowed to operate at an ambient temperature not lower than minus 40 deg C. at the request of the customer (in agreement with the supplier), a winch of a different climatic design and/or placement category can be manufactured.